Dryer Vent Products
Construction Solutions manufacturers dryer vent enclosures for all types of applications. Construction Solutions, LLC is a specialty residential and commercial building products company. Please click on the appropriate products below for more information.
DBX1000 Plastic Dryer Vent Box
The DBX1000 Dryer Vent enclosures with snap on trim ring. Made of High Impact Polystyrene. The DBX1000 dryer vent enclosures comes in two sizes 4″ (For a 2×4 wall) or a 6″ size. (For a 2×6 wall) This dryer vent enclosures can also be used to down vent, just turn the box upside down and your done. The DBX1000 comes with a snap on trim ring which helps elimate repairs and saves you time.
DBX1000M Metal Dryer Vent Box
The DBX1000M Metal Dryer Vent Box with snap on trim ring. The DBX1000M dryer vent enclosures is powder coated white, 22 gauge steel, comes in two sizes 4″ (For a 2×4 wall) or a 6″ size. (For a 2×6 wall) This dryer vent enclosures can also be used for down venting, just simply turn the box upside down. The DBX1000M also comes with a snap on trim ring.
- Diagram- Metal Dryer Vent Box- DBX1000M- (4’’ box for 2×4 framing)
- Diagram 2- Metal Dryer Vent Box- DBX1000M- (4’’ box for 2×4 framing)
- Diagram- Metal Dryer Vent Box- DBX1000M- (6’’ box for 2×6 framing)
- Diagram 2- Metal Dryer Vent Box- DBX1000M- (6’’ box for 2×6 framing)
- Installation Instructions- DBX1000M
- Fact Sheet- DBX1000M
- UL Information- DBX1000M
- 1-Hour Installation Instructions- DBX1000M
- Builder/sub-contractor submittal form
- DBX1000 Submital Form
DBX1017FR Metal Dryer Vent Box
Powder Coated Metal Dryer Vent Box. The inexpensive DBX101 7FR metal dryer vent box is powder coated white to match the washer box. The box is 1O” WIDE BY 17″ TALL and designed to fit into a 2 x 6 framed wall. Designed and tested to meet 1 hour equal F&T fire rating requirement for through penetration fire rated system.
DBX1424 Metal Dryer Vent Enclosures
The DBX1424 Dryer Vent Box with snap on trim ring is powder coated white, designed to work with pedestal and stackable dryers. The 14″ wide by 24″ tall, 22 gauge metal box and ring is designed to fit into a 2×6 framed wall. The DBX1424 has inside dimensions that are 3 1/2 inches taller than any other manufactured dryer vent enclosures. Thereby, accommodating all pedestal heights. This dryer vent enclosures is designed to be used with or without the trim ring.
Size = 2×6 Framing